Search for:
Advanced Search
About Us | Contact Us | Terms & Conditions | Privacy Policy | Shipping and Delivery | Size Chart | Returns | Instructions Remote Detonator | Pyro Instuctions | UKARA
Pyro Instuctions

Thermobaric / Multi Bang

 1).  The simplest and easy way to get good performance from your Thermo Baric Grenade is, as ever, to read the instructions on the grenade and follow them.  If you phone us at the factory and you haven’t followed the instructions properly we will mock you mercilessly.

2).  The Thermo Baric Grenade is a binary mix so the first thing to do is shake it vigorously to mix the chemicals.

 

3). Snap off the cap, don’t twist it off and it shouldn’t require too much force.

4).  Once snapped off you’ll see the friction fuse.  Take the rough side of the cap and strike the fuse with it.  This shouldn’t take too much force, no more than striking a non-safety match.

5).  You will now find yourself holding a live pyrotechnic.   Drop a safe distance away (5m)

Thunderflash / Flash Bang 

1).  The simplest and easy way to get good performance from your Thunder Flash MK5 is, as ever, to read the instructions on the grenade and follow them.  If you phone us at the factory and you haven’t followed the instructions properly we will mock you mercilessly.

2). Twist off the cap, it shouldn’t require too much force.

3).  Once snapped off you’ll see the friction fuse.  Take the rough side of the cap and strike the fuse with it.  This shouldn’t take too much force, no more than striking a non-safety match.

4).  You will now find yourself holding a live pyrotechnic.  Drop a safe distance away (5m), it will explode with flash and flare, it’s also quite noisy.

 Grenade Friction

1).  The simplest and easy way to get good performance from your Ball Grenade Friction Fuse is, as ever, to read the instructions on the grenade and follow them.  If you phone us at the factory and you haven’t followed the instructions properly we will mock you mercilessly.

2). Twist off the cap, it shouldn’t require too much force.

3).  Once snapped off you’ll see the friction fuse.  Take the rough side of the cap and strike the fuse with it.  This shouldn’t take too much force, no more than striking a non-safety match.

4).  You will now find yourself holding a live pyrotechnic.  Drop a safe distance away (5m)

Grenade Pull Fuse

1).  The simplest and easy way to get good performance from your Pull Fuse Ball Grenade is, as ever, to read the instructions on the grenade and follow them.  If you phone us at the factory and you haven’t followed the instructions properly.

2).  Grasp the grenade firmly and hold it away from your body.

3).  Put your fingers in the ring and pull the ring smoothly but firmly at ninety degrees from the grenade.  It may spark which could sting a little, please don’t be a wuss about it (if you are we’ll leave it to your team mates to make fun of you).
• Do not tug or yank it.  We make these things from cardboard for obvious reason, if you pull them too hard you’ll pull out the detonator.
• Make sure your thumb and none of your fingers are on the cap.  The hole on the top is a vent for the ignition; if you cover it you’ll burn your fingers.
• They should not be suspended by the ring pull for obvious reasons. Although they are in fairly tight and need a good pull to remove and ignite the unit, there is still a risk that unit may be caught on a branch and the unit is pulled from the pin attached to the person.

4).  You will now find yourself holding a live pyrotechnic.  Drop a safe distance away (5m).

Smoke Grenade 

1).  The simplest and easiest way to get good performance from your Smoke Grenades is, as ever, to read the instructions on the grenade and follow them.  If you phone us at the factory and you haven’t followed the instructions properly we will mock you mercilessly.

 

2). Twist off the cap, it shouldn’t require too much force.

3).  Once snapped off you’ll see the friction fuse.  Take the rough side of the lid and strike the fuse with it.  This shouldn’t take too much force, no more than striking a non-safety match.

4).  You will now find yourself holding a live pyrotechnic.  This is an excellent opportunity for you to get rid of it drop the Smoke Grenade and retreat at least 5m, it will produce smoke and heat.

 

 Stick Grenade

1).  The simplest and easy way to get good performance from your Pull Fuse Stick Grenade is, as ever, to read the instructions on the grenade and follow them.  If you phone us at the factory and you haven’t followed the instructions properly we will mock you mercilessly.

2).  Remove the base cap.

3).  Allow the pull string to drop free of the handle.  Don’t tug it out as you may well end up priming it (see below).

4).  Grasp the handle firmly with one hand firmly, whilst pulling the string sharply in a downward motion.

5).  You will now find yourself holding a live pyrotechnic.  Drop a safe distance away (5m)

 

 

Shopping Basket
Your basket is empty.
0Items in cart:
£0.00Total:
Welcome Guest
Popular Products
Sale Items
Mailing List
Subscribe to mailing list:
Email: